SME series servo motors from Parker (SBC divisione) are brushless, low inertia servo motors offering nominal torque ranges from 0.19 to 60 Nm and speeds up to 7500 rpm, as the SMB series servo motors except that SME series motors have encoder feedback.
There is an extensive range of Parker (SBC divisione) motors with options such as holding brakes, feedback types and adders for different inertia, so please contact us for motor sizing and advice on options when selecting a servo motor for your application.
SME Series technical specifications
- Permanent magnet synchronous brushless servo motor
- High performance NdFeB magnets, salient pole technology
- Incremental encoder, EnDat absolute encoder (single-turn), EnDat absolute encoder (multi-turn), Hiperface absolute encoder (single-turn), Hiperface absolute encoder (multi-turn), Hiperface DSL absolute encoder (single-turn), Hiperface DSL absolute encoder (multi-turn)
- Number of poles: 8
- Continuous torque 0.19 – 60 Nm
- Peak torque 0.75 – 190 Nm
- Speeds up to 7,500 min‾¹
- Power range: 0.2 – 9.4 kW
- Frame sizes: 40, 60, 82, 100, 115, 142 and 170 mm
- Shaft and flange size flexibility
- Cooling method: air cooled / natural convection
- Compatible with SBC/Parker Parker (TPD-M, SLVD-N, HIDRIVE, ViX, TWIN-N/SPD-N, ARIES) servo drives
- Protection level (IEC60034-5) is IP64. IP65 is an option. IP67 (SME170).
- Voltage supply 230/400 – 480 VAC but other voltages are available on request
- Other options: holding brake, thermal protection, increased inertia
Quin has over 20 years of experience in specifying, installing, and supporting Parker (SBC divisione) motors and will be happy to advise on a suitable motor for your application.